Alerts

`get_alert`

Get details of an alert

Route: /api/v0/alerts/:id

id is the alert id, you can obtain a list of alert ids from list_alerts.

Input:

-

Example:

curl -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/alerts/1

Output:

{
 "status": "ok",
 "message": "",
 "count": 7,
 "alerts": [
  {
   "hostname": "localhost",
   "id": "1",
   "device_id": "1",
   "rule_id": "1",
   "state": "1",
   "alerted": "1",
   "open": "1",
   "timestamp": "2014-12-11 14:40:02"
  }]
}

`ack_alert`

Acknowledge an alert

Route: /api/v0/alerts/:id

id is the alert id, you can obtain a list of alert ids from list_alerts.
note is the note to add to the alert
until_clear is a boolean and if set to false, the alert will re-alert if it worsens/betters.

Input:

-

Example:

curl -X PUT -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/alerts/1

Output:

{
 "status": "ok",
 "message": "",
 "message": "Alert has been acknowledged"
}

`unmute_alert`

Unmute an alert

Route: /api/v0/alerts/unmute/:id

id is the alert id, you can obtain a list of alert ids from list_alerts.

Input:

-

Example:

curl -X PUT -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/alerts/unmute/1

Output:

{
 "status": "ok",
 "message": "Alert has been unmuted"
}

`list_alerts`

List all alerts

Route: /api/v0/alerts

Input:

state: Filter the alerts by state, 0 = ok, 1 = alert, 2 = ack
severity: Filter the alerts by severity. Valid values are ok, warning, critical.
alert_rule: Filter alerts by alert rule ID.
order: How to order the output, default is by timestamp (descending). Can be appended by DESC or ASC to change the order.

Examples:

curl -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/alerts?state=1

curl -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/alerts?severity=critical

curl -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/alerts?order=timestamp%20ASC

curl -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/alerts?alert_rule=49

Output:

{
 "status": "ok",
 "message": "",
 "count": 1,
 "alerts": [
  {
   "id": "1",
   "device_id": "1",
   "rule_id": "1",
   "state": "1",
   "alerted": "1",
   "open": "1",
   "timestamp": "2014-12-11 14:40:02"
  }]
}

Rules

`get_alert_rule`

Get the alert rule details.

Route: /api/v0/rules/:id

id is the rule id.

Input:

-

Example:

curl -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/rules/1

Output:

{
 "status": "ok",
 "message": "",
 "count": 1,
 "rules": [
  {
   "id": "1",
   "device_id": "1",
   "rule": "%devices.os != \"Juniper\"",
   "severity": "warning",
   "extra": "{\"mute\":true,\"count\":\"15\",\"delay\":null,\"invert\":false}",
   "disabled": "0",
   "name": "A test rule"
  }
 ]
}

`delete_rule`

Delete an alert rule by id

Route: /api/v0/rules/:id

id is the rule id.

Input:

-

Example:

curl -X DELETE -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/rules/1

Output:

{
 "status": "ok",
 "message": "",
 "message": "Alert rule has been removed"
}

`list_alert_rules`

List the alert rules.

Route: /api/v0/rules

-

Input:

-

Example:

curl -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/rules

Output:

{
 "status": "ok",
 "message": "",
 "count": 1,
 "rules": [
  {
   "id": "1",
   "device_id": "-1",
   "rule": "%devices.os != \"Juniper\"",
   "severity": "critical",
   "extra": "{\"mute\":false,\"count\":\"15\",\"delay\":\"300\",\"invert\":false}",
   "disabled": "0",
   "name": "A test rule"
  }]
}

`add_rule`

Add a new alert rule.

Route: /api/v0/rules

-

Input (JSON):

devices: This is either an array of device ids or -1 for a global rule
builder: The rule which should be in the format entity.condition value (i.e devices.status != 0 for devices marked as down). It must be json encoded in the format rules are currently stored.
severity: The severity level the alert will be raised against, Ok, Warning, Critical.
disabled: Whether the rule will be disabled or not, 0 = enabled, 1 = disabled
count: This is how many polling runs before an alert will trigger and the frequency.
delay: Delay is when to start alerting and how frequently. The value is stored in seconds but you can specify minutes, hours or days by doing 5 m, 5 h, 5 d for each one.
interval: How often to re-issue notifications while this alert is active,0 means notify once.The value is stored in seconds but you can specify minutes, hours or days by doing 5 m, 5 h, 5 d for each one.
mute: If mute is enabled then an alert will never be sent but will show up in the Web UI (true or false).
invert: This would invert the rules check.
name: This is the name of the rule and is mandatory.
notes: Some informal notes for this rule

Example:

curl -X POST -d '{"devices":[1,2,3], "name": "testrule", "builder":{"condition":"AND","rules":[{"id":"devices.hostname","field":"devices.hostname","type":"string","input":"text","operator":"equal","value":"localhost"}],"valid":true},"severity": "critical","count":15,"delay":"5 m","interval":"5 m","mute":false,"notes":"This a note from the API"}' -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/rules

Output:

{
 "status": "ok"
}

`edit_rule`

Edit an existing alert rule

Route: /api/v0/rules

-

Input (JSON):

rule_id: You must specify the rule_id to edit an existing rule, if this is absent then a new rule will be created.
devices: This is either an array of device ids or -1 for a global rule
builder: The rule which should be in the format entity.condition value (i.e devices.status != 0 for devices marked as down). It must be json encoded in the format rules are currently stored.
severity: The severity level the alert will be raised against, Ok, Warning, Critical.
disabled: Whether the rule will be disabled or not, 0 = enabled, 1 = disabled
count: This is how many polling runs before an alert will trigger and the frequency.
delay: Delay is when to start alerting and how frequently. The value is stored in seconds but you can specify minutes, hours or days by doing 5 m, 5 h, 5 d for each one.
interval: How often to re-issue notifications while this alert is active,0 means notify once.The value is stored in seconds but you can specify minutes, hours or days by doing 5 m, 5 h, 5 d for each one.
mute: If mute is enabled then an alert will never be sent but will show up in the Web UI (true or false).
invert: This would invert the rules check.
name: This is the name of the rule and is mandatory.
notes: Some informal notes for this rule

Example:

curl -X PUT -d '{"rule_id":1,"device_id":"-1", "name": "testrule", "builder":{"condition":"AND","rules":[{"id":"devices.hostname","field":"devices.hostname","type":"string","input":"text","operator":"equal","value":"localhost"}],"valid":true},"severity": "critical","count":15,"delay":"5 m","interval":"5 m","mute":false,"notes":"This a note from the API"}' -H 'X-Auth-Token: YOURAPITOKENHERE' https://librenms.org/api/v0/rules

Output:

{
 "status": "ok"
}